• Home
  • EDrive Actuators | Doig Corporation Authorized Distributor Wisconsin

eDRIVE Actuators

EDRIVE ACTUATOR DISTRIBUTOR WISCONSIN. EDrive actuators initially developed a wide variety of heavy duty ball screw linear actuators, targeting the machine tool retro-fit market. EDrive designs are conservative, rugged construction, long life, and high precision. Founded in 1980, EDrive actuators are designed, manufactured, tested, and serviced in West Hartford, Ct. Doig Corporation is an authorized EDrive actuator distributor

INTRODUCING THE ELIMINATOR ST (STAINLESS STEEL) ACTUATOR

  • 316L Series Stainless Steel Exterior:
    Withstands frequent caustic wash down
  • Rugged Steel Construction:
    Tolerates rough operating conditions
  • High Dynamic Capacity Components:
    Result in reliability and longevity
  • High Thrust Even at High Speed:
    Means no compromises in the production cycle
  • Lead Accuracy:
    0.002 in/ft Standard, 0.0005 in/ft Optional

  • Integral Load Cell Option:
    Continually monitor axial force
  • Accepts Most Motors or Gearboxes Without an Adapter Plate:
    Reducing cost and allowing the end user to select their preferred motor source
  • IP66 Rated:
    When using positive pressure purge provision
  • Variety of Standard Mounting Options:
    Makes it easy to mount and align actuator

E-Tac ET

  • Force From 200 to 300 lbs
  • Velocity to 33 in/sec
  • Sealed Chamber Design with Purge Provisions

VecTac VT

  • Force From 400 to 2,000 lbs
  • Strokes to 30 inches maximum
  • Velocity to 40 in/sec
  • Sealed Chamber Design with Purge Provisions

L-Tac LS

  • Force From 400 to 2,000 lbs
  • Strokes to 48 inches maximum
  • Velocity to 40 in/sec
  • Sealed Chamber Design with Purge Provisions

Eliminator HD

  • 2,000-25,000 lbs Force
  • Heavy Wall Steel Construction
  • Longest Life
  • Simultaneous High Thrust with High Speed

Eliminator HDL with Integral Load Cell Option

  • Integrated force measurement
  • 2,000-25,000 lbs Force
  • Accurate within ½ percent of rated force
  • Conforms to latest standard ASTM E4 for Testing Machines
  • Internal load cell ½ wire connections are “out of the way”
  • Load cell rated for 100 million cycles

Eliminator SD

  • 30,000-66,000 lbs Force
  • Heavy Wall Steel Construction
  • Highest (B10) Life Rating
  • Piston with Rugged Anti Rotation Feature

Eliminator SS

  • Velocity to 65 in/sec
  • Rated Thrust 2,000 lbs Force
  • Heavy Wall Steel Construction
  • Highest (B10) Life Rating
  • Piston with Rugged Anti-Rotation

MT Precision

  • Machine Tool Grade
  • High Precision with Force to 15,000 lbs
  • Rugged Steel Construction
  • Designed for High System Stiffness

RESOURCES