|
|
APPLIED MOTION STM23S-2RE
APPLIED MOTION (STM23S-2RE) NEMA 23 Integrated Drive+Motor with Encoder. The STM23S-2RE integrated stepper is a drive+motor unit, fusing a NEMA 23 step motor and a sophisticated 5.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.
Part Number: STM23S-2RE
Supply Voltage: 12-70 VDC
Supply Voltage Type: DC
Control Modes: Step & Direction, Velocity (Oscillator), Streaming Commands
Communication Ports: RS-485
Encoder Feedback: Yes
Step Resolution: Full, Half, Microstepping, Microstep Emulation
Idle Current Reduction: 0-90%
Setup Method: Software setup
Digital Inputs: 3
Digital Outputs: 1
Analog Inputs: 1 single-ended
Circuit Protection: Short circuit, Over-voltage, Under-voltage, Over-temp
Status LEDs: 1 red, 1 green
Frame Size: NEMA 23
Holding Torque: 125 oz-in
Step Angle: 1.8 deg
Rotor Inertia: 3.68E-03 oz-in-sec2
Length: 3.64 inches
Weight: 30 oz
Ambient Temperature Range: 0 to 40 °C
Ambient Humidity: 90% max, non-condensing
Insulation Class: Class B (130 ºC)
Shaft Diameter: 6.35 mm (0.250 inch)