APPLIED MOTION PRODUCTS
APPLIED MOTION PRODUCTS STEPSERVO DRIVES
StepSERVO Drives are the closed-loop versions of Applied Motion Products well established, high performance, microstepping step motor drives. By incorporating closed-loop servo control algorithms in these drives and pairing them with StepSERVO Motors with high resolution encoders, we are able to create StepSERVO systems with performance that greatly exceeds conventional step motor performance. Peak torques as much as 50% higher, smoother, quieter operation and lower power consumption are just some of the benefits of StepSERVO Drive and Motor systems. Brushless DC Products
NEW STRAC STEPPER DRIVE MODELS RELEASED
APPLIED MOTION PRODUCTS STEPSERVO DRIVES
StepSERVO Drives are the closed-loop versions of Applied Motion Products well established, high performance, microstepping step motor drives. By incorporating closed-loop servo control algorithms in these drives and pairing them with StepSERVO Motors with high resolution encoders, we are able to create StepSERVO systems with performance that greatly exceeds conventional step motor performance. Peak torques as much as 50% higher, smoother, quieter operation and lower power consumption are just some of the benefits of StepSERVO Drive and Motor systems. Brushless DC Products
FEATURED PRODUCT: STEPSERVO INTEGRATED MOTORS
StepSERVO is the Next Evolution in Step Motor Technology. Starting with a proven integrated motor design, we add a high-resolution incremental encoder and closed-loop servo firmware to create a motor that offers the best step motor performance available today. StepSERVO integrated motors offer the same high-torque-at-low-speed and excellent holding torque characteristics of open loop stepping motors, with the advantages of true closed-loop control. These advantages include the ability to create peak torques up to 50% higher than open loop motors, as well as cooler and quieter operation.
More on the StepSERVO herePLANETARY GEARHEADS
NEW PRODUCTS: PH SERIES MINI PLANETARY GEARHEADS
PH Mini Gearheads are designed to be used with small step motors and Applied Motion StepSERVO motors in the NEMA 8, 11 and 14 frame sizes. The miniature design of the PH gearheads allows these gearheads to be paired with small motors without adversely affecting the outside dimensions of the combined gearmotor. PH Series Mini's are available in three frame sizes: 22, 28 and 36 mm.
Want more of this mini?FEATURED PRODUCT: POWER SUPPLIES
Product Features
- PS150A24 24VDC, 150 watts, 6.3 amps OR PS320A48 48VDC, 320 watts, 6.7 amps
- Universal input voltage
- Regulated output voltage
- For use with DC-powered stepper and servo drives
The PS150A24 switching power supply is an excellent choice for use with Applied Motion stepper and servo drives.
The PS150A24 is UL Recognized (File No. E341851), CE approved, and RoHS compliant.
Key Product Types
StepSERVO™ is the next evolution in step motor technology. Consisting of a proven integrated motor design with a high-resolution 5000 line incremental encoder (20,000 counts/rev) and closed-loop servo firmware.
- Closed-loop servo control using high torque step motors
- High acceleration for faster machine cycles and greater productivity
- Energy efficient, cool running
- All-in-one compact solution
- IP65 versions for wet and dusty environments
Applied Motion stepper drives offer advanced current control with features such as microstepping and microstep emulation, anti-resonance and torque ripple smoothing, all designed to maximize the performance of your stepper system.
- Two-phase, bipolar step motor drives
- Step (pulse) & direction, CW/CCW pulse, A/B quadrature pulse options
- Stand-alone execution of stored programs using your choice of two popular programming environments: Si Programmer™ and Q Programmer™
Applied Motion specializes in offering two-phase, hybrid step motors in NEMA sizes 8, 11, 14, 17, 23, 24, and 34, both in standard and high torque designs. Applied Motion step motors are designed to work optimally with Applied Motion stepper drives.
- High torque design
- High-bus voltage operation
- Microstepping performance
STM integrated drive+motors fuse step motor and drive components into a single device.
- Space saving design
- Reduces wiring and saves cost
- NEMA 17, 23 and 24 frame sizes
Full-featured servo motor drives in a variety of control options ranging from step (pulse) & direction, CW/CCW pulse, A/B quadrature pulse, analog torque and velocity, and streaming serial commands.
- Stand-alone execution of stored programs using: Si Programmer™ and Q Programmer™
- Quick Tuner™ for easy setup and tuning the servo system
- Control modes includes: torque mode, velocity mode, and position mode
High-torque brushless servo motors in NEMA and metric frame sizes.
- M series motors come in a 40, 60, or 80 mm frame size
- V series motors come in NEMA 17, 23, and 34 frame sizes
- Specifically designed to work with Applied Motion servo drives
These brushless DC drives are based on advanced control technology that features excellent performance and ease of use.
- High performance, simple setup and low cost in a compact design
- Motor velocity over a wide speed range is controlled via analog or digital inputs
- Two on-board trimpots make setup simple
- Dynamic braking enables the motor to stop quickly
These brushless DC motors offer long life and low maintenance for applications requiring stable velocity control over a wide speed range.
- Three-phase brushless motors provided with hall signals for commutation and velocity loop feedback
- Metric frame sizes
- Optional gearheads for applications demanding high torque
- Performance-matched for use with our line of brushless DC drives
Applied Motion offers a complete range of pure planetary gearheads for use in precision applications with step and servo motors. These gearheads sport high torque ratings and low backlash, are available in NEMA sizes 17, 23, and 34, as well as some metric frame sizes, and come in a wide range of ratios.
NEW PRODUCTS:
PH Mini Gearheads are designed to be used with small step motors and Applied Motion StepSERVO motors in the NEMA 8, 11 and 14 frame sizes. The miniature design of the PH gearheads allows these gearheads to be paired with small motors without adversely affecting the outside dimensions of the combined gearmotor. PH Series Mini's are available in three frame sizes: 22, 28 and 36 mm.
PRODUCT FEATURES
- PS150A24 24VDC, 150 watts, 6.3 amps OR PS320A48 48VDC, 320 watts, 6.7 amps
- Universal input voltage
- Regulated output voltage
- For use with DC-powered stepper and servo drives
The PS150A24 is UL Recognized (File No. E341851), CE approved, and RoHS compliant.