|
|
APPLIED MOTION HT34-488D
APPLIED MOTION Step Motor, NEMA 34, High Torque, Single Shaft, 10' Cable With Connector
*** TARIFF SURCHARGE MAY APPLY ***
*** TARIFF SURCHARGE MAY APPLY ***
Part Number: HT34-488
Frame Size: NEMA 34
Motor Type: High torque
Part Number w/Double Shaft: HT34-488D
Part Number w/Encoder: HT34-488D-YAA
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 3.11 inches
Number of Lead Wires: 8
Lead Wire Configuration: shielded cable w/ connector
Lead Wire/Cable Length: 10 feet
Lead Wire Gauge: 22 AWG
Unipolar Holding Torque: 392 oz-in
Bipolar Holding Torque: 555 oz-in
Step Angle: 1.8 deg
Bipolar Series Current: 4.25 A/phase
Bipolar Series Resistance: 0.72 Ohms/phase
Bipolar Series Inductance: 6.0 mH/phase
Bipolar Parallel Current: 8.50 A/phase
Bipolar Parallel Resistance: 0.18 Ohms/phase
Bipolar Parallel Inductance: 1.5 mH/phase
Unipolar Current: 6.01 A/phase
Unipolar Resistance: 0.36 Ohms/phase
Unipolar Inductance: 1.5 mH/phase
Rotor Inertia: 2.27E-02 oz-in-sec2
Integral Gearhead: No
Weight: 4.6 lbs
Storage Temperature: -40 to 70 °C
Insulation Class: Class B (130 ºC)
Maximum Radial Load: 42 lbs
Maximum Thrust Load: 33 (2.2 w/ encoder) lbs
Shaft Diameter: 12.7 mm (0.500 inch)
Shaft Run Out: 0.002 inch T.I.R. max
Radial Play: 0.001 inch max w/ 1.1 lb load
End Play: 0.003 inch max w/ 2.2 lb load
Perpendicularity: 0.003 inches
Concentricity: 0.003 inches