CTC 2700 Series Retainer Bracket Kit - Retainer Bracket to relieve cables wired from CTC I/O Modules.
CTC 2700 Series 32 Channel Input Module - Provides 32 opto-isolated, self-powered DC Inputs
CTC 2700 Series Combination I/O Module - Provides 16 open-collector (0.5 Amp DC) outputs and 16 self powered DC Inputs, all opto-isolated.
CTC 2700 Series 16 Channel Analog Input Module - Provides 16 configurable 0-10V or 4-20mA analog Inputs. Resolution: 0-10V = 1 part in 1000, 4-20mA = 1 part in 160
CTC 2700 Series High Speed Counter Module - Allows connection of quadrature encoder to 2200/2600 ctrls for counting at rates up to 1 MHz (opto-isolated). Also supported by the 2703APX & 2703APXplus CPU
CTC 2700 Series 8 CH Analog Output Module - Provides 8 12-bit analog outputs, configurable for +/-5, +/-10 or +10 volt operation.
CTC 2700 Series 16 Channel AC Output Module - Provides 16 outputs with 0.72 amp capacity for 120 VAC operation.
CTC 2700 Series 8 Channel Relay Output Module - Each relay with 5 Amp normally-open contacts-M.O.V. protected.
CTC 2700 Series Analog I/O Module - Provides 8 Differential analog Inputs & 8 analog outputs - (14 bit) plus 8 Digital outputs.
CTC 2700 Series 32 Channel Output Module - Provides 32 opto-isolated 0.5 Amp DC open-collector outputs. Short-circuit protected.
CTC 2700 Series Analog Interface Module - Provides 8 configured Inputs between 4-20mA or +/- 10v; 8 fixed outputs @ +/- 10v & 8 Digital outputs.
CTC 2700 Series Dual Channel RS232 Module - Supporting 2 RS-232 ports. Port 1 is configurable for RS-485. Module not supported in 2200/2200XM controllers. For master operation the DeviceNet. Configurator must be used - DnetConfig
CTC 2700 Series Networking/Comm Module - Provides Ethernet 10BaseT; 2 RS-232 ports and 1 RS-485 port; UDP; TCPIP; CTNET
CTC 2700 Series Comb 16In/16Out Sourcing Module - Provides 16 sourcing 24VDC outputs(.5Amp) & 16 sourcing 24VDC Inputs, all Optoisolated.
CTC 2700 Series Single Axis Stepper Mtr Module - Intellegent single-axis Module that is fully programmable. Pulse & Digital Inputrection outputs & deDigital Inputcated Inputs are provided.
CTC 2700 Series Dual Axis Stepper Mtr Module - Intellegent dual-axis Module that is fully programmable. Pulse & Digital Inputrection outputs & deDigital Inputcated Inputs are provided.
CTC 2700 Series 16 Channel Input Module - Provides 16 configurable 0-10V or 4-20 mA analog Inputs. Resolution 0-10V = 1 part in 1000, 4-20mA = 1 part in 800
CTC 2700 Series 16 Channel Analog Input Module - Provides 16 configurable 0-10V or 4-20mA analog Inputs. Resolution 0-10V = 1 part in 1000, 4-20mA - 1 part in 350
CTC 2700 Series High Speed Counter Module - Allows connection of count up/ Digital Outputwn encoder to 2200/2600/2700 ctrlrs for counting at rates up to 1 MHz (opto-isolated). Also supported by the 2703APX & 2703APXplus CPU
CTC 2700 Series Networking/Comm. Module - Provides Ethernet (10-Base-T) multidrop communicaton and two RS232 ports, Not supported in the 2200XM controller
CTC 2700 Series Single Axis Servo Control Module - Intelligent sgl-axis servo ctrl Module-Fully programmable w/leader encoder following & position reg capabilities
CTC 2700 Series Dual Axis Servo Control Module - Intelligent dual-axis servo mtr Module-fully programable w/ axis-to-axis ratioing & position registration capabilities
CTC 2700 Series Analog Interface Module - 4 AI(Jtype TC,4-20 mA,or +/-1) 4 AO(4-20mA +/-10v); 4AI (+/-10v); 4AO (+/-10v) & 8 Digital Output (SNK NPN)
CTC 2700 Series Analog Interface Module - 4 AI(Ktype TC,4-20 mA,or +/-1) 4 AO(4-20mA +/-10v); 4AI (+/-10v); 4AO (+/-10v) & 8 Digital Output (SNK NPN)
CTC 2700 Series Analog Interface Module - Provides 8 configured Inputs betwen J type TC or 4-20mA or +/- 10v & 8 fixed outputs @ +/-10v & Digital outputs.
CTC 2700 Series Analog Interface Module - Provides 8 configured Inputs between K type TC or 4-20mA or +/- 10v & fixed outputs @ +/10v & Digital outputs.
CTC 2700 Series Programmable Automation Controller (PAC) - 10-slot panel mount control rack w/2703AP CPU, PS, 2 RS232 ports & 2203 32 I/O Module (64K user memory)
CTC 2700 Series Programmable Automation Controller (PAC) - 12-slot panel mount control rack w/2703AP CPU, PS, 2 RS232 ports & 2203 32 I/O Module, Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (64K user memory)
CTC 2700 Series Programmable Automation Controller (PAC) - 16-slot panel mount control rack w/2703AP CPU, PS, 2 RS232 ports & 2203 32 I/O Module (64K user memory)
CTC 2700 Series Programmable Automation Controller (PAC) - 5-slot panel mount control rack w/2703AP CPU, PS, 2 RS232 ports, & 2203 32 I/O Module (64K user memory)
CTC 2700 Series Programmable Automation Controller (PAC) - 10-slot panel mount control rack w/2703APX CPU, PS, 2 RS232 ports & 2203 32 I/O Module, Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (96K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 12-slot panel mount control rack w/2703APX CPU, PS, 2 RS232 ports & 2203 32 I/O Module, Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (96K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 16-slot panel mount control rack w/ 2703APX CPU; PS; 2-RS232 ports & 2203 32 I/O Module, Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (96K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 5-slot panel mount control rack w/2703APX CPU, PS, 2 RS232 ports, & 2203 32 I/O Module, Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (96K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 10-slot panel mount control rack w/2703APX+ CPU, PS, 2 RS232 ports, & 2203 32 I/O Module. Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (359K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 12-slot panel mount control rack w/2703APX+ CPU, PS, 2 RS232 ports, & 2203 32 I/O Module. Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (359K user memory) Requires Quickstep vs 3.0
CTC 2700 Series Programmable Automation Controller (PAC) - 5-slot panel mount control rack w/2703APX+ CPU, PS, 2 RS232 ports, & 2203 32 I/O Module Adds 4000 adDigital Inputtional 32-bit NV Reg (8500 NV Reg) (359K user memory) Requires Quickstep vs 3.0
CTC 2700 Series CPU Module for 2700 Series Ctrl - Prog steps 4095; (2)RS232 ports; on-board encoder Inputs reg Inputs; Digital Inputg I/O via high density conn. (96K user memory)
CTC 2700 Series CPU Module for 2700 Series Ctrl - 50% more memory; 4 times the number of user flags; 4000 more NV registers; Digital Outputuble the motion axes than the 2703AP (96K user Memory) Requires Quickstep vs 3.0
CTC 2700 Series CPU Module for 2700AP Series Ctrl - 3X the memory of 2703AP; 4 times the number of user flags; 4000 more NV registers; supports up to 32 axes of motion (359K Memory) Requires Quickstep vs 3.0
CTC 5100 Blue Fusion Series Programmable Automation Controller (PAC) - 6-Bay Low-profile; 25MHz CPU; ethernet 10Mbps 128K NV RAM; 1 Meg Flash; 18-32VDC w/Encoder Option
CTC 5100 Blue Fusion Series Programmable Automation Controller (PAC) - 6-Bay Low-profile 25MHz CPU; ethernet 10Mbps 128K RAM; 1 Meg Flash; 10-32VDC
CTC 5100 Blue Fusion Series Programmable Automation Controller (PAC) - 6-Bay Low-profile; 25MHz CPU; ethernet 10Mbps 128K RAM; 1 Meg Flash; 10-32VDC w/Encoder Option
CTC 5200 Blue Fusion Series Blue Fusion Controller - Standard 6-Bay Low-Profile; 1.5MB NVRAM; 1 MB Flash; 19-32 VDC; Ethernet 10/100
CTC 5300 Blue Fusion Series 200 MHz G3 CPU (4MB) - Single bay cpu assembly. GEN 3 CPU(2LAN 4xRS232, USB,2MB NVRAM, 4MB Flash)
CTC 5300 Blue Fusion Series 200 MHz G3 CPU (8MB & RS485) - Single bay cpu assembly. GEN 3 CPU(2LAN 2xRS232,1xRS485, USB,2MB NVRAM, 8MB Flash)
CTC MultiPro Series CPU Module for MultiPro Controllers - The standard MultiPro replacement CPU Module from the AP class of controllers. This Module is for use in a MultiPro only.
CTC MultiPro Series MultiPro+ MC Controller - 16 Inputs, 24 outputs,8 analog Inputs, 8 analog log outputs. 2 RS-232 ports & Ethernet Port Ethernet Port.Incl Conn Kits.
CTC MultiPro Series MultiPro+ Dual Stepper Ctrlr - 16 Inputs, 16 outputs, 2 axes stepper control,2 RS-232 ports & 1 Ethernet Port. Includes Port. Includes connector kits.