RENCO REN28-SET

REN28 Compact design with 1-3/8″ push button (recessed 1/4″). Mounts vertically or horizontally; no mounting bracket required. Light actuation pressure (5 OUNCES). Mounting screws included (10-32). 1/8″ NPT connections. Rounded edges, no sharp edges or corners to injure operator. The SERIES REN28-SET is two separate palm buttons that use our light touch buttons. Attached to one palm button is our logic module. They are easy to install: mount securely then connect a supply line to each #1 Port. Next connect #2 to #3 port, port #4 is output. Gives a maintained output signal when both buttons are pressed and held. PART #s REN28-SET FOR BOTH PALM BUTTONS. REN28-100 PALM BUTTON WITHOUT THE LOGIC MODULE, WHICH MAY BE USED AS A 3-WAY PNEUMATIC PUSH BUTTON REN28-SET OPTIONS AVAILABLE -C Cancelable output. An input from a pressure or limit valve will cancel the output. -PA .1-30 seconds adjustable pulsed output. The palm buttons must be held the full time ALWAYS USE DRY, NON-LUBRICATED AIR

Click HERE to download literature or more information on this product.