ROBOWORLD DLD-EP-T3-TEF

ROBOWORLD (DLD-EP-T3-TEF) Three-Piece Laminated Teflon Robosuit® For Epson T3 SCARA Robot. Coverage extends from the bottom of the stationary base to the robot’s quill (Z axis). Overlapping material cuffs shall be employed at the 1st, 2nd and 4th axis. The suit is installed or removed using Velcro seams and nickel-plated snaps of the upper-arm, lower-arm and base suit covers. Velcro sealed bellows are provided for both the lower portions of the quill and permit full Z-axis motion. All seams are double stitched with TEX-108 polyester thread for strength and durability. The DLD-EP-T3-TEF is manufactured from 9-mil grey FDA laminated Teflon material. Maximum operating temperature is 500F. (Grey) Laminated Teflon Material 9-mil (GREY) TCI CrossFilm FDA laminated Teflon® is rated to a maximum (radiant) operating temperature of 500F. TCI CrossFilm is a monolithic laminate with no internal scrim. Teflon® is impervious to all known (commercially available) coolants, lubricants and –amine containing compounds. Gray-colored, 9-mil TCI CrossFilm™ 2110 laminated Teflon® complies with the following requirements for food handling applications: FDA Requirements: CFR 177.1550, and CFR 178.3297. European Regulations: RoHS 2002/95/EC 2003/11/EC, 2005/59/EC, 1935/2004, and Global RoHS REACH SVHC. Teflon is immune to microbiological and enzymatic attack as the polymer does not provide nourishment or porosity to support growth. It is also immune to all known sanitizers, disinfectants, gamma radiation and heat disinfection up to a maximum (radiant) temperature limit of 550F.